Long 445 Utility Tractor - Parts, Specs & Serial Numbers

Description:

The Long 445 Utility Tractor is a powerful, mid-size diesel workhorse known for its simplicity, fuel economy, and ease of repair. Manufactured by UTB in Romania and distributed in the U.S. by Long Manufacturing, the 445 is part of the trusted Long 400 series lineup. It's ideal for hay operations, plowing, and general farm use thanks to its reliable engine and rugged hydraulic system.

Engine & Power

• Engine Type: UTB/Long 4-cylinder diesel

• Displacement: 164.4 cubic inches (2.7 L)

• Rated Horsepower: 45 HP (33.6 kW)

• Rated RPM: 2200

• Cooling System: Liquid-cooled

• Fuel Capacity: 13.7 gallons (51.9 L)

Transmission

• Type: Gear drive

• Speeds: 8 forward / 2 reverse

• Clutch: Single dry disc

• PTO: Live 540 RPM PTO, independent on some later models

Hydraulics & Hitch

• Hydraulic Type: Open center

• Pump Flow: 6.5 GPM

• 3-Point Hitch: Category 1

• Lift Capacity: ~2,200 lbs

• Remote Hydraulics: Optional rear valve ports available

Dimensions & Weight

• Wheelbase: 75 inches

• Operating Weight: Approx. 3,800 lbs

• Length: 130 inches

• Width: 68 inches

• Height (to steering wheel): 64 inches

• Tires: Front 6.00-16, Rear 13.6-28

Common Maintenance Tasks

• Routine oil, air, and fuel filter changes

• Brake disc replacement and linkage checks

• PTO clutch and hydraulic pump seals are known wear points

• Steering linkage and front axle pivot bushings may require servicing over time

Shop Long 445 filters, brake kits, clutch assemblies, and hydraulic parts on BrokenTractor.com

Common Issues & Solutions

• Hydraulics not lifting properly? Inspect pump and internal relief valve – find hydraulic rebuild kits here

• PTO slips under load? Check the clutch and replace worn disks – see Long 445 PTO parts

• Hard starting in cold weather? Replace glow plugs and check fuel preheat – browse Long 445 engine parts

Pro Tip:

The serial number for the Long 445 is located on the right-hand side of the transmission housing near the clutch pedal. Be sure to reference this number when ordering specific components for accurate fit.