Long 2610 Tractor - Parts, Specs & Serial Number Guide

The Long 2610 Tractor is a heavy-duty, high-horsepower utility/agricultural tractor produced by Long Agribusiness and built using UTB/Universal components from Romania. Designed for demanding farm applications like plowing, baling, and loader work, the Long 2610 features robust hydraulics, dual-speed PTO, and a powerful diesel engine delivering over 70 HP. Known for reliability and ease of service, this tractor remains popular among farmers needing serious pulling power with straightforward maintenance.

Engine:

• Make: UTB (Universal)

• Type: 4-cylinder, liquid-cooled diesel

• Displacement: 268 cu in (4.4 L)

• Power Output: 70–72 HP PTO

• Fuel Tank Capacity: 21 gallons (79.5 liters)

Transmission:

• Type: 12-speed manual transmission

• Gears: 12 forward, 4 reverse

• Clutch: Dual-stage dry clutch

• Max Speed: Approx. 18.5 mph

Hydraulics:

• System Type: Open center

• Pump Flow: 6.6 gpm (main), separate steering pump

• Hydraulic Pressure: 2,350 psi

• 3-Point Hitch: Category II

• Lift Capacity: 3,800–4,000 lbs

Dimensions & Weight:

• Wheelbase: 88 inches

• Length: 146 inches

• Width: 78 inches

• Height (to top of ROPS): 100 inches

• Operating Weight: 6,600–7,200 lbs (depending on 2WD or 4WD)

PTO & Performance:

• PTO Type: Independent, dual speed

• PTO RPM: 540 / 1,000

• Drawbar HP: 62–65 HP

Maintenance Specs:

• Engine Oil Capacity: 10 quarts

• Coolant Capacity: 16 quarts

• Air Cleaner: Dry type with safety element

• Service Tips: 100-hour oil changes, replace fuel filters every 150 hours, inspect lift arms and PTO seals seasonally

Common Issues & Quick Fixes:

• PTO Not Engaging or Slipping: Often due to worn clutch pack — Order PTO Kits

• Hydraulics Weak or Slow: Typically caused by pump wear or piston seal failure — Shop Long 2610 Hydraulic Parts

• Steering Hard in 4WD: Caused by worn steering cylinders or low pressure — Steering Cylinders Available Here

Serial Number Location:

The Long 2610 serial number is located on the left-hand side of the clutch housing, below the dash panel, or near the left rear axle housing.

Pro Tip: This model is especially prone to PTO shaft wear with frequent round baler use — check shaft tolerances regularly and replace worn seals to avoid gearbox damage.

Keep it going strong: Shop Long 2610 Tractor Parts Now