John Deere 310E Backhoe Loader – Parts, Specs & Serial Numbers

Description:

The John Deere 310E Backhoe Loader, produced from 1997 to 2001, advanced the 310 line with refined controls, enhanced hydraulic performance, and operator comfort upgrades. Retaining the ruggedness of the 310D while adding improved serviceability and smoother shifting, the 310E is widely trusted for trenching, grading, and general-purpose loading. Its straightforward layout and compatibility with a broad range of parts make it a dependable and easy-to-maintain machine for both contractors and municipalities.

Specifications:

Engine

• Model: John Deere 4045D

• Type: 4-cylinder, naturally aspirated diesel

• Displacement: 276 cu in (4.5 L)

• Net Power: 73 hp (54.4 kW) @ 2,200 rpm

Transmission

• Type: Power Shuttle

• Gears: 4 forward / 4 reverse

• Clutch: Hydraulic wet-disc

• Max Travel Speed: 21.7 mph (35 km/h)

Hydraulic System

• System Type: Open center

• Pump Flow: 28.5 GPM (108 L/min)

• System Pressure: 2,500 psi (172 bar)

Backhoe Specs

• Digging Depth: 14 ft 3 in (4.34 m)

• Loading Height: 11 ft 2 in (3.4 m)

• Bucket Digging Force: 11,000 lbf (48.9 kN)

• Swing Arc: 180°

Loader Specs

• Lift Capacity to Full Height: ~5,000 lbs (2,268 kg)

• Breakout Force: ~7,700 lbf (34.2 kN)

• Bucket Widths: 72–84 in (1.83–2.13 m)

Dimensions & Weight

• Operating Weight: ~13,700 lbs (6,214 kg)

• Overall Length: 23 ft 3 in (7.09 m)

• Wheelbase: 82 in (2.08 m)

• Height to Top of ROPS: 8 ft 10 in (2.7 m)

Maintenance Essentials:

Recommended Service Intervals:

• Oil & Filters: Change every 100–150 hours

• Hydraulic Filters & Fluid: Inspect and replace every 500 hours

• Greasing: Every 8–10 hours at loader, boom, and swing pivots

Frequently Replaced Components:

• Hydraulic cylinder seal kits

• Loader pins and bushings

• Power shuttle rebuild kits

• Brake parts and hardware

Common Issues & Quick Fixes:

• Hydraulic Arm Drift: Typically caused by worn cylinder seals — fix with seal kits

• Brake Drag or Soft Pedal: Address with 310E brake repair kits

• Hard Shifting or Clutch Delay: Wet-disc clutch wear — solve with power shuttle service components

Pro Tips:

• Install inline hydraulic filters to extend fluid life and protect your system.

• Keep radiator fins clear — the 4045 engine runs hot under extended load.

• When replacing loader bushings, inspect pivot pins for wear and replace as needed.

Serial Number Info:

• Location: Left side of the machine frame, near loader tower or below operator’s platform

• Serial Number Format: Begins with T0310EX_ _ _ _ _

• Double-check your serial prefix before ordering parts to ensure proper fitment.