John Deere 160 P‑Tier Excavator – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right side of the upper frame, near the cab entry or adjacent to the operator’s seat. Always verify this before ordering parts to guarantee proper fit.

Key Specifications

• Model Years: 2021 – Present

• Engine: John Deere P‑Tier, 4-cylinder diesel, Tier 4 Final

• Net Power: 126 hp (94 kW) @ 2,200 rpm

• Operating Weight: 36,000 lb (16,330 kg)

• Fuel Tank Capacity: 55 gallons

• Hydraulic System Capacity: 56 gallons

• Hydraulic Tank Capacity: 28 gallons

• Hydraulic Pump Flow: 110 gpm main + 20 gpm auxiliary

• Hydraulic Pressure: Up to 4,000 psi

• Travel Speed: 2.5 mph (low), 5.0 mph (high)

• Swing Speed: 9.0 rpm

• Tail Swing: Reduced-tail-swing design

• Ground Pressure: Approx. 7.0 psi

Dimensions

• Overall Length: 29 ft 6 in

• Width: 8 ft 4 in

• Transport Height: 9 ft 8 in

• Ground Clearance: 16 in

• Tail Swing Radius: 4 ft 10 in

• Track Width: 24 in

• Track Gauge: 6 ft 4 in

Working Range

• Max Digging Depth: 20 ft 10 in

• Max Reach at Ground: 31 ft 4 in

• Max Cutting Height: 27 ft

• Max Dump Height: 22 ft

Performance & Design Highlights

• Reduced-tail-swing for tight-site maneuvering

• Dual travel speeds with auto-shift functionality

• Integrated dozer blade for stability and trench backfill

• Quick-coupler ready hydraulic system for easy attachment changes

• Dual cooling circuits with side-by-side radiators for efficient cooling

• Spacious, climate-controlled cab with ergonomic joysticks and high visibility

• High-flow circuit ready for hydraulic attachments like breakers or augers

Routine Maintenance

• Engine Oil & Filter: Every 250 hours

• Fuel Filter: Every 500 hours

• Hydraulic Oil: Change every 3,000 hours

• Hydraulic Filter: Replace every 1,000 hours

• Cooling System: Clean radiator and cooler fins every 250 hours

• Daily Checks: Grease boom and swing pivots, inspect track tension, check hoses, fluid levels, and radiator cleanliness

Common Issues & Fixes

• Hydraulic Leaks: Inspect hoses, seals, and couplers regularly; replace worn or damaged components

• Track Slack: Adjust using grease fitting to prevent derailment and uneven wear

• Cooling Blockage: Dust may clog radiator fins—clean daily during dusty operations

• Slow Hydraulic Performance: Often due to clogged filters or low fluid—check hydraulic oil and system

• Control Drift: May require controller calibration or lubrication at pivot points