Ford 3600 Utility Tractor

Description:

The Ford 3600 Utility Tractor is a durable, mid-sized workhorse built from 1975 to 1981 as part of Ford’s 600 Series. Designed for reliability and ease of service, it features a powerful 3-cylinder diesel or gas engine, strong hydraulic capacity, and optional live PTO. Ideal for mowing, loader work, field prep, and hauling, the 3600 continues to be a trusted model for farms, municipalities, and acreage owners.

Engine & Power

• Engine: Ford 3-cylinder

  • Diesel: 175 CID (2.9L)

  • Gasoline: 158 CID (2.6L)

• Horsepower: 40–45 PTO HP (varies slightly by fuel type)

• Fuel Tank Capacity: 13 gallons

• Cooling System: Pressurized, ~13 qt capacity

• Air Cleaner: Dry-type with pre-cleaner

Transmission Options

• 8-speed manual transmission (4 forward, 4 reverse in 2 ranges)

• Optional Select-O-Speed 10-speed power shift (less common)

• PTO Options:

  • Transmission PTO (standard)

  • Live PTO (with two-stage clutch, optional)

Hydraulics & PTO

• Hydraulic Pressure: 2,500 psi

• Pump Flow: 5.4 GPM

• 3-point Hitch: Category I

• Rear PTO: 540 RPM

• PTO HP: ~40–42 HP

Dimensions & Weight

• Operating Weight: ~4,100 lbs

• Wheelbase: 75.8 in.

• Length: 126 in.

• Height (steering wheel): 64 in.

• Rear Tires: 13.6x28 standard

Maintenance Essentials

• Brake shoes and return spring kits
  → Ford 3600 Brake Kits

• Hydraulic piston seals, lift cover gaskets
  → Ford 3600 Hydraulic Parts

• Fuel and air filters, oil pressure sending units
  → Ford 3600 Engine Filters

• Steering sector bushings and drag link ends

Common Issues & Quick Fixes

• 3-point lift drops or jitters – replace piston O-rings and check control linkage

• PTO won’t engage properly – inspect clutch or PTO shift collar

• Brakes pulling unevenly – rebuild both sides with new brake shoes and actuator pins

• Loose steering wheel – replace worn bushings or sector shaft bearings

Serial Number Location

• Location: On the flat pad behind the starter on the left side of the engine block

• Format may include “C3600XXXX” or prefix like “6A” for year and plant code

Pro Tips

• Use M2C134D spec fluid in hydraulic/transmission combo systems

• Drain and clean the hydraulic sump screen every 500 hours to avoid lift sluggishness

• For tight loader response, replace worn pivot pins and sleeves
  → Ford Loader Pins & Bushings