Ford 3000 Utility Tractor

Description:

The Ford 3000 Utility Tractor was produced from 1965 to 1975 as part of Ford’s Thousand Series. It was a significant upgrade from earlier models, featuring a more powerful 3-cylinder engine, optional live PTO, and improved hydraulics. Known for its versatility, fuel economy, and dependable performance, the 3000 is ideal for mowing, loader work, bush hogging, and light tillage on small to mid-sized properties.

Engine & Power

• Engine: Ford 3-cylinder

  • Gasoline: 158 CID (2.6L)

  • Diesel: 175 CID (2.9L)

• Horsepower: ~38 PTO HP

• Fuel Capacity: 13 gallons

• Cooling System: Pressurized, with ~13 quarts capacity

• Air Cleaner: Oil bath (early) or dry-type (later models)

Transmission Options

• 4-speed, 6-speed, or 8-speed manual (standard options)

• Optional 10-speed Select-O-Speed power shift

• PTO Options:

  • Transmission PTO

  • Live PTO (with two-stage clutch)

Hydraulics & PTO

• Hydraulic Pressure: 2,500 psi

• Pump Flow: ~5.4 GPM

• 3-point Hitch: Category I

• Rear PTO: 540 RPM

• PTO HP: Approx. 38 HP

Dimensions & Weight

• Operating Weight: ~3,800 lbs

• Wheelbase: 75.8 in.

• Length: 125 in.

• Height to Steering Wheel: 61 in.

• Rear Tires: 13.6x28 standard

Maintenance Essentials

• Lift piston O-rings and hydraulic gaskets
  → Ford 3000 Hydraulic Repair Kits

• Brake shoes and springs
  → Ford 3000 Brake Parts

• Fuel and air filters, sediment bowl kits

• Steering column bushings and tie rod ends
  → Ford 3000 Steering Components

Common Issues & Quick Fixes

• 3-point won’t lift or drifts down – replace piston seals and inspect control valve

• PTO grinding or won’t engage – check clutch or linkage wear

• Brake pull or fade – rebuild both brake sides with new linings and springs

• Hard starting diesel model – test glow plugs and compression

Serial Number Information

• Location: On the flat pad behind the starter, left side of engine block

• Example Format: C20xxxx

• Model ID prefix: “C10”, “3100”, or “3000”

Pro Tips

• For smooth PTO and lift performance, always use Ford M2C134D hydraulic/transmission fluid

• Grease all pivot points on lift arms and steering monthly

• Clean hydraulic intake screen every 500 hours for optimal flow