Ford 2810 Utility Tractor

Description:

The Ford 2810 Utility Tractor is a member of the Ford 10 Series, produced from 1983 to 1990. Designed for mid-sized farm and utility tasks, the 2810 combines power and durability with easy maintenance. Its reliable 3-cylinder diesel engine, responsive hydraulics, and straightforward mechanical systems make it ideal for mowing, loader work, light tillage, and general agricultural operations.

Engine & Power

• Engine: Ford 3-cylinder diesel

• Displacement: 175 CID (2.9L)

• Horsepower: 42–45 PTO HP

• Fuel Capacity: 16 gallons

• Cooling System: Pressurized, with 13.2 quarts capacity

• Air Cleaner: Dual dry element with pre-cleaner

Transmission Options

• 8x2 Manual Gear Transmission (standard)

• Optional 4x4 Synchro, 6x2, or 8x4 Dual Power (less common)

• PTO Options:

  • Transmission PTO (standard)

  • Live or independent PTO (optional)

Hydraulics & PTO

• Hydraulic Pressure: 2,500 psi

• Pump Flow: 8.5 GPM

• 3-point Hitch: Category I and II with draft, position, and load control

• Rear PTO: 540 RPM

• PTO HP: Approx. 42 HP

Dimensions & Weight

• Operating Weight: ~4,600 lbs

• Wheelbase: 75.8 in.

• Length: 129 in.

• Height (top of steering wheel): 64.6 in.

• Rear Tires: 13.6x28 standard

Maintenance Essentials

• Lift cover O-rings, piston seals, and gaskets
  → Ford 2810 Hydraulic Parts

• Brake shoes and spring kits
  → Ford 2810 Brake Kits

• Air and fuel filters, water pump, glow plugs
  → Ford 2810 Engine Components

• Steering sector bushings and drag link ends

Common Issues & Quick Fixes

• Hydraulic lift fails or jerks – Replace piston O-ring and check lift control valve

• PTO won’t engage or slips under load – Inspect clutch pack or linkage

• Brake fade or pull to one side – Install new brake shoes and actuators

• Hard starting in cold weather – Replace glow plugs and test battery/alternator

Serial Number Information

• Location: On the flat boss behind the starter on the engine block

• Serial number format: May start with BB or C2810XXXXX

• ID tag may also be found on the transmission housing

Pro Tips

• Use M2C134D hydraulic/transmission fluid to protect PTO and lift components

• For improved winter starting, upgrade to high-output glow plugs

• Grease all loader or lift pivot points every 10 operating hours to avoid pin wear