Case SV300 Skid Steer Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right-hand side of the loader arm or frame near the front hinge, just below the operator cab. Always verify this number before ordering parts to ensure proper compatibility.

Key Specifications

• Model Years: 2025 – Present

• Engine: 7.0 L, 6‑cylinder diesel, Tier 4 Final

• Net Power: 300 hp @ 2,400 rpm

• Operating Weight: 33,000 lb (with bucket and full fuel)

• Rated Operating Capacity: 18,500 lb

• Tipping Load: 37,000 lb

• Bucket Breakout Force: 55,000 lb

• Lift Height (to bucket hinge pin): 15 ft 8 in

• Loader Reach at Full Height: 5 ft 0 in

• Travel Speed: Up to 14 mph (two‑speed)

• Ground Pressure: 15.1 psi

• Turning Radius (outside): 10 ft 4 in

• Length with Standard Bucket: 17 ft 6 in

• Width (with bucket): 8 ft 0 in

• Height to Cab Roof: 9 ft 2 in

• Fuel Tank Capacity: 65 gallons

• Hydraulic System Capacity: 65 gallons

• Auxiliary Hydraulic Flow: 65 gpm

• Hydraulic Operating Pressure: 5,400 psi

• Standard Bucket Capacity: 3.00 cubic yards

• Auxiliary Coupler: Universal quick‑attach standard

Performance & Design Highlights

• Extreme-Class Strength: 18,500 lb rated capacity and 55,000 lb breakout force for the most demanding applications

• Ultra-High-Flow Hydraulics: 65 gpm flow-sharing system for maximum attachment efficiency and control precision

• Premium Cab Features: ROPS/FOPS-certified with air-ride suspension seat, full HVAC, panoramic visibility, and quiet operation

• High-Speed Travel: Two-speed transmission offers up to 14 mph; switch to low gear for heavy-load cycles

• Attachment Versatility: Compatible with forks, grapples, mulchers, augers, sweepers, breakers, snow tools, and specialized attachments

Routine Maintenance

• Engine Oil & Filter: Replace every 500 hours

• Hydraulic Fluid & Filter: Change oil every 1,000 hours; replace filter every 500 hours

• Fuel Filter: Replace every 500 hours

• Air Filter: Inspect every 250 hours; replace if dusty

• Grease Points: Daily lubrication of loader arms, pivot joints, and coupler

• Cooling System: Clean radiator and coolers weekly

• Tire or Track Inspection: Check before each use for wear or correct pressure

Common Issues & Fixes

• Hydraulic Hose Wear: Inspect daily; replace any hose showing signs of abrasion or leakage promptly

• Tire or Undercarriage Wear: Monitor tread and structural components; service or replace as needed

• Overheating: Maintain clear cooling components and proper coolant levels

• Electrical or Sensor Alerts: Use onboard diagnostics to check connectors, wiring, and fuses when alerts appear

• Loss of Breakout Force: Replace worn bucket teeth and ensure hydraulic system is free of contamination