Case SV185B Skid Steer Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is typically located on the right-hand side of the loader arm or frame near the front hinge, just below the operator cab. Always verify this number before ordering parts to ensure proper compatibility.

Key Specifications

• Model Years: 2022 – Present

• Engine: 4-cylinder ISM N844T/M3 diesel, Tier 4 Final

• Net Power: 60 hp @ 2,900 rpm

• Max Torque: 140 lb-ft @ 1,800 rpm

• Operating Weight: 7,100 lb (with bucket and full fuel)

• Rated Operating Capacity: 1,850 lb

• Tipping Load: 3,700 lb

• Fuel Tank Capacity: 18 gallons

• Hydraulic System Capacity: 9 gallons

• Hydraulic Flow – Standard: 20 gpm

• Hydraulic Flow – High Flow: 30 gpm (optional)

• Relief Pressure: 3,200 psi

• Bucket Breakout Force: 6,000 lb

• Travel Speed: 7.5 mph (standard) or 11.5 mph (high-flow option)

Dimensions

• Length with Bucket: 11 ft 0 in

• Width Over Tires: 5 ft 4 in

• Height to Top of ROPS: 6 ft 6 in

• Ground Clearance: 7 in

• Wheelbase: 3 ft 10 in

Performance & Design Highlights

• Vertical-Lift Boom: Optimized for truck loading and extended reach

• Enhanced Torque: Improved hydraulics and torque over earlier version

• Improved Cab: ROPS/FOPS-certified with upgraded controls and visibility

• Optional High-Flow Hydraulics: Better attachment performance and cycle time

• Service Access: Easy-to-open engine hood and ground-level service points

Routine Maintenance

• Engine Oil & Filter: Replace every 500 hours

• Hydraulic Fluid & Filter: Change every 1,000 hours; filter every 500 hours

• Fuel Filter: Replace every 500 hours

• Air Filter: Inspect every 250 hours; replace if necessary

• Grease Points: Daily lubrication of loader arms, couplers, and pivot pins

• Cooling System: Clean radiators weekly and check coolant level

Common Issues & Fixes

• Hydraulic Hose Wear: Inspect hoses and fittings daily; replace at first sign of abrasion

• Mild Overheating: Keep coolers clean and coolers free of debris

• Electrical Alerts: Use onboard diagnostics to check fuses, sensor connectors, and wiring

• Reduced Breakout Force: Replace worn bucket teeth and maintain clean hydraulic filters and fluid

• Lift Arm Stiffness: Lubricate pivot bushings regularly and check for wear