Case SR210 Skid Steer Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right-hand side of the loader arm or frame near the front hinge, just below the operator cab. Always verify this number before ordering parts to ensure proper compatibility.

Key Specifications

• Model Years: 2025 – Present

• Engine: 6.7‑L, 6‑cylinder diesel, Tier 4 Final

• Net Power: 210 hp @ 2,400 rpm

• Operating Weight: 22,800 lb (with bucket and full fuel)

• Rated Operating Capacity: 10,500 lb

• Tipping Load: 21,000 lb

• Bucket Breakout Force: 30,000 lb

• Lift Height (to bucket hinge pin): 13 ft 4 in

• Loader Reach at Full Height: 3 ft 6 in

• Travel Speed: Up to 12 mph (two-speed)

• Ground Pressure: 11.5 psi

• Turning Radius (outside): 9 ft 2 in

• Length with Standard Bucket: 15 ft 2 in

• Width (with bucket): 6 ft 8 in

• Height to Cab Roof: 8 ft 0 in

• Fuel Tank Capacity: 45 gallons

• Hydraulic System Capacity: 45 gallons

• Auxiliary Hydraulic Flow: 45 gallons per minute

• Hydraulic Operating Pressure: 4,500 psi

• Standard Bucket Capacity: 1.75 cubic yards

• Auxiliary Coupler: Universal quick‑attach included

Performance & Design Highlights

• Super-Heavy-Class Capability: 10,500 lb rated capacity and 30,000 lb breakout force for the toughest jobs

• High-Flow Hydraulics: Flow-sharing system ensures simultaneous loader and steering function

• Spacious, Safe Cab: ROPS/FOPS-certified with air-ride suspension seat, HVAC, panoramic visibility, and rear camera

• High-Speed Travel: Two-speed transmission up to 12 mph to reduce travel time between sites

• Attachment Compatibility: Built to accommodate heavy-duty attachments such as forks, grapples, augers, sweepers, breakers, and snow tools

Routine Maintenance

• Engine Oil & Filter: Replace every 500 hours

• Hydraulic Fluid & Filter: Change every 1,000 hours; filter every 500 hours

• Fuel Filter: Replace every 500 hours

• Air Filter: Inspect every 250 hours; replace as needed

• Grease Points: Daily lubrication of loader arms, pivot joints, and coupler

• Cooling System: Clean radiator and coolers weekly

• Tire or Track Inspection: Check pressure and wear before each work shift

Common Issues & Fixes

• Hydraulic Hose Wear: Inspect daily and replace any showing signs of abrasion or leakage

• Tire or Undercarriage Wear: Monitor tread and structural integrity; service or replace when needed

• Overheating: Maintain clean cooling systems and proper coolant level

• Electrical/System Alerts: Use onboard diagnostics to inspect connectors, wiring, fuses, and sensors

• Loss of Breakout Force: Replace worn bucket teeth and ensure clean hydraulic filters and fluid