Case SR175 Skid Steer Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right-hand side of the loader arm or frame near the front hinge, just below the operator cab. Always verify this number before ordering parts to ensure proper compatibility.

Key Specifications

• Model Years: 2020 – Present

• Engine: 3.9‑L, 4‑cylinder diesel, Tier 4 Final

• Net Power: 130 hp @ 2,400 rpm

• Operating Weight: 14,900 lb (with bucket and full fuel)

• Rated Operating Capacity: 5,150 lb

• Tipping Load: 10,300 lb

• Bucket Breakout Force: 13,200 lb

• Lift Height (to bucket hinge pin): 11 ft 10 in

• Loader Reach at Full Height: 2 ft 10 in

• Travel Speed: Up to 9.5 mph (two-speed)

• Ground Pressure: 8.0 psi

• Turning Radius (outside): 8 ft 4 in

• Length with Standard Bucket: 13 ft 5 in

• Width (with bucket): 6 ft 4 in

• Height to Cab Roof: 7 ft 6 in

• Fuel Tank Capacity: 34 gallons

• Hydraulic System Capacity: 30 gallons

• Auxiliary Hydraulic Flow: 35 gallons per minute

• Hydraulic Operating Pressure: 3,700 psi

• Standard Bucket Capacity: 1.20 cubic yards

• Auxiliary Coupler: Universal quick‑attach standard

Performance & Design Highlights

• Heavy-Duty Rating: 5,150 lb capacity and high breakout force for intense lifting and loading

• High-Flow Hydraulic System: Flow-sharing hydraulics ensure smooth simultaneous steering and attachment operation

• Comfort-Oriented Cab: ROPS/FOPS-certified with air ride seat, full HVAC, and optional rear camera

• Optimal Mobility: Two-speed travel up to 9.5 mph for transit efficiency and low gear for heavy lifting

• Attachment Flexibility: Built to handle pallets, grapples, sweepers, augers, and snow tools

Routine Maintenance

• Engine Oil & Filter: Replace every 500 hours

• Hydraulic Fluid & Filter: Replace every 1,000 hours; replace filter every 500 hours

• Fuel Filter: Replace every 500 hours

• Air Filter: Inspect every 250 hours; replace as needed

• Grease Points: Lubricate loader arms, pivot pins, and coupler daily

• Cooling System: Clean radiator and coolers weekly

• Tire or Track Check: Inspect before each shift for wear or pressure issues

Common Issues & Fixes

• Hydraulic Hose Wear: Check hoses and fittings daily; replace at first sign of abrasion or leak

• Tire or Undercarriage Wear: Monitor tread and integrity; service or replace as needed

• Overheating: Keep cooling components clean and ensure proper coolant level

• Electrical Alerts: Use onboard display to diagnose issues; inspect fuses, wiring, and connectors

• Reduced Breakout Force: Replace worn teeth and ensure hydraulic filters and fluid stay clean