Case SR160B Skid Steer Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right-hand side of the loader arm or frame near the front hinge, just below the operator cab. Always verify this number before ordering parts to ensure proper fit.

Key Specifications

• Model Years: 2023 – Present

• Engine: 3.9‑L, 4‑cylinder diesel, Tier 4 Final

• Net Power: 110 hp @ 2,400 rpm

• Operating Weight: 14,500 lb (with bucket and full fuel)

• Rated Operating Capacity: 4,200 lb

• Tipping Load: 8,400 lb

• Loader Arm Breakout Force: 9,900 lb

• Bucket Breakout Force: 10,200 lb

• Lift Height (to bucket hinge pin): 11 ft 9 in

• Loader Reach at Full Height: 2 ft 8 in

• Travel Speed: Up to 9.5 mph (two-speed)

• Ground Pressure: 7.2 psi

• Turning Radius (outside): 8 ft 4 in

• Length with Standard Bucket: 13 ft 2 in

• Width (with bucket): 6 ft 4 in

• Height to Cab Roof: 7 ft 6 in

• Fuel Tank Capacity: 34 gallons

• Hydraulic System Capacity: 29 gallons

• Auxiliary Hydraulic Flow: 33 gallons per minute

• Hydraulic Operating Pressure: 3,600 psi

• Standard Bucket Capacity: 1.10 cubic yards

• Auxiliary Coupler: Universal quick‑attach standard

Performance & Design Highlights

• Heavy-Class Power: 4,200 lb rated capacity meets demanding loader applications

• High Flow Hydraulics: Flow-sharing system ensures smooth simultaneous steering and tool use

• Robust Lift Capability: Strong breakout forces support heavy digging and lifting

• Comfortable Cabin: ROPS/FOPS-certified with air ride seat, full HVAC, and rear camera-ready

• Quick Travel: Two-speed drive reaching up to 9.5 mph for site transits

• Attachment Versatility: Supports forks, grapples, augers, and winter attachments

Routine Maintenance

• Engine Oil & Filter: Replace every 500 hours

• Hydraulic Fluid & Filter: Replace every 1,000 hours; filter every 500 hours

• Fuel Filter: Replace every 500 hours

• Air Filter: Inspect every 250 hours; replace if dusty

• Grease Points: Daily lubrication on loader arms, pivot joints, and coupler

• Cooling System: Clean radiator and coolers weekly

• Tire or Track Inspection: Check tire pressure and condition before operation

Common Issues & Fixes

• Hydraulic Hose Wear: Inspect daily and replace any showing abrasion or leaks

• Tire or Undercarriage Wear: Monitor tread and integrity for service or replacement

• Overheating: Keep cooling coils clear and coolant levels maintained

• Electrical Alerts: Use onboard diagnostics to check connectors, fuses, and sensors

• Reduced Breakout Force: Replace bucket teeth and maintain clean hydraulic filters and fluid