Case SR130 Skid Steer Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right-hand side of the loader arm or frame near the front hinge, just below the operator cab. Verify this number before ordering parts to ensure proper fit.

Key Specifications

• Model Years: 2020 – Present

• Engine: 3.4‑L, 4‑cylinder diesel, Tier 4 Final

• Net Power: 90 hp @ 2,400 rpm

• Operating Weight: 8,960 lb (with bucket and full fuel)

• Rated Operating Capacity: 3,050 lb

• Tipping Load: 6,100 lb

• Bucket Breakout Force: 7,200 lb

• Lift Height (to bucket hinge pin): 11 ft

• Loader Reach at Full Height: 2 ft 2 in

• Travel Speed: Up to 7.1 mph

• Ground Pressure: 5.1 psi

• Turning Radius (outside): 8 ft

• Length with Standard Bucket: 12 ft 3 in

• Width (with bucket): 6 ft

• Height to Cab Roof: 7 ft 2 in

• Fuel Tank Capacity: 28 gallons

• Hydraulic System Capacity: 23 gallons

• Auxiliary Hydraulic Flow: 23 gallons per minute

• Hydraulic Operating Pressure: 3,200 psi

• Standard Bucket Capacity: 0.76 cubic yards

• Auxiliary Coupler: Standard quick‑attach interface

Performance & Design Highlights

• Comfortable Cab: ROPS/FOPS-certified with air ride suspension seat, full HVAC, and C-channel visibility

• High Lift Capability: Ideal for pallet forks and material stacking

• Advanced Hydraulics: Flow-sharing system maintains simultaneous steering and tool operation

• Versatile Attachments: Supports buckets, forks, grapples, mulchers, and snow tools

• Efficient Power Delivery: Rated capacity meets heavy-class demands with durable undercarriage

Routine Maintenance

• Engine Oil & Filter: Change every 500 hours

• Hydraulic Fluid & Filter: Change every 1,000 hours; filter every 500 hours

• Fuel Filter: Change every 500 hours

• Air Filter: Inspect every 250 hours; replace if dusty

• Grease Points: Daily lubrication on loader arms, coupler, and pivot pins

• Cooling System: Clean radiator and coolers weekly

• Track/Tire Inspection: Check pressure or tension and condition before use

Common Issues & Fixes

• Hydraulic Hose Wear: Inspect hoses and fittings daily; replace any showing wear or leaks

• Tire and Undercarriage Wear: Check tires for chipping and undercarriage for wear—rebalance or replace as necessary

• Overheating: Keep cooling coils clear of debris and verify coolant levels

• Electrical Alerts: Monitor diagnostic display; inspect connections and fuses if alerts occur

• Reduced Breakout Force: Replace worn bucket teeth and check hydraulic filter for contamination