Description:
Serial Number Location:
For Case 680G models (produced from 1987 to 1991), the serial number plate is typically found on the left side of the machine frame near the loader tower or stamped into the rear of the transmission housing. Confirm your serial number before ordering parts, as component compatibility can vary between early and late production models.
Case 680G Serial Numbers by Year
-
1978: #9127701 – 9131700
-
1979: #9131701 – 9135709
-
1980: #9135710 – 9140229
-
1981: #9140230+
Key Specifications
| Feature |
Specification |
| Years Manufactured |
1987 – 1991 |
| Engine Model |
Case 504BDT (6-cylinder turbo diesel) |
| Net Horsepower |
96 HP (72 kW) @ 2,200 rpm |
| Max Torque |
280 lb-ft (380 Nm) @ 1,400 rpm |
| Displacement |
336 cu in (5.5 L) |
| Transmission Type |
Power Shuttle (4 forward / 4 reverse) |
| Hydraulic Flow Rate |
28 gal/min (106 L/min) |
| Hydraulic Pressure |
2,300 psi (159 bar) |
| Operating Weight |
Approx. 17,000 lbs (7,711 kg) |
| Loader Bucket Capacity |
1.25 – 1.5 cu yd (0.96 – 1.15 m³) |
| Backhoe Digging Depth |
Up to 17.5' (5.33 m) |
| Breakout Force (Loader) |
12,300 lbs (5,579 kg) |
| Travel Speed (Max) |
22 mph (35.4 km/h) |
| Dimensions (L×W×H) |
23.5' × 7.6' × 10.7' |
Performance & Design Highlights
Turbocharged Diesel Power
The Case 504BDT engine provides strong performance, excellent torque, and improved fuel efficiency—ideal for heavy digging and lifting operations.
Power Shuttle Transmission
The 680G includes a reliable 4-speed forward/reverse transmission, enhancing productivity during trenching and backfilling.
Upgraded Hydraulics
With 28 GPM flow, the 680G delivers faster cycle times and smoother control of both the loader and backhoe systems.
Reinforced Loader & Backhoe Arms
Stronger loader arms, backhoe booms, and structural reinforcements support longer service life under high-load conditions.
Maintenance & Common Issues
Routine Maintenance
| Component |
Service Interval |
| Engine Oil & Filter |
Replace every 250 hours |
| Hydraulic Fluid & Filter |
Replace every 1,000 hours |
| Fuel Filter |
Replace every 500 hours |
| Air Filter |
Clean every 250 hours; replace as needed |
| Transmission Fluid |
Change every 1,000 hours |
| Cooling System |
Flush and inspect every 1,000 hours |
Common Issues & Fixes
| Issue |
Quick Fix |
| Power Loss Under Load |
Check turbocharger function; replace air and fuel filters |
| Backhoe or Loader Drift |
Repack hydraulic cylinders; replace piston seals if worn |
| Shuttle Shift Delay |
Inspect clutch packs and pressure settings |
| Steering Wheel Play |
Check steering cylinder bushings and tie rod ends |
| Hydraulic Noise or Heat |
Flush system and replace fluid/filters |