Case 60XT Skid Steer Loader: XT-Series Cummins-Powered Hydrostatic Skid Steer
The Case 60XT is part of the XT-series skid steer loader line - Cummins-powered, hydrostatic dual-path drivetrain, with a modernized cab and electrical layout versus the vintage 18-series. It bridges the older 1800-series Case skid steers and the later alpha-series electronic platforms.
Where the 60XT fits in the Case skid steer line
The 60XT sits in the XT-series Case skid steer range between the Case 40XT and the Case 70XT. It pairs a Cummins industrial diesel with a hydrostatic dual-path drivetrain, and the XT-series cab provides improved ergonomics over the 18-series predecessors. The XT generation served as the bridge between the simpler vintage 1800-series Case skid steers and the later alpha-series machines that introduced more electronic controls.
Case 60XT Skid Steer Loader - Quick Specs
- Class
- Skid Steer Loader
- Generation
- XT-Series
- Engine
- Cummins 4B 3.9L 4-Cyl Diesel
- Drivetrain
- Hydrostatic Dual-Path
- Predecessor
- Case 1840 / 1845C (18-Series)
- Successor
- Case 410 (Alpha-Series)
- Serial Plate
- Left side, below cab entrance or in rear engine compartment
Engine, hydraulics, and drivetrain
The 60XT runs a Cummins 4B 3.9L four-cylinder industrial diesel through a hydrostatic dual-path drivetrain - closed-loop pumps drive sprocket-shaft motors with chain final drive to the wheels. Loader hydraulics use a piston pump feeding either electrohydraulic-pilot or mechanical control valves, with direct-acting lift and tilt cylinders to the loader arms.
Early-production 60XT units carried mechanical-injection Cummins 4B engines; later units shifted to electronically-managed variants. Confirm by engine serial when ordering internal parts. The 4B family is one of the most-supported industrial engines on the market, which keeps parts coverage strong on this machine.
Common service items on the 60XT
- Engine internals: Cummins 4B / 4BT pistons, rings, sleeves, bearings, gaskets. Mechanical-injection (early) vs. electronic (late) variants - confirm by serial.
- Fuel system: Cummins fuel injection components, injectors, lift pump, primary and secondary filters.
- Cooling system: Radiator, water pump, thermostat, fan, charge-air cooler (turbo variants), hoses, belts.
- Hydraulics: Loader lift and bucket tilt cylinder seal kits, piston-pump rebuilds, control valves, hoses. DMEL1075 cylinder spanner wrench for cylinder service.
- Drivetrain: Hydrostatic dual-path pumps and drive motors, drive chains, sprockets, axles. D64175 sprocket shaft needle bearing cross-fits broadly across the Case skid steer family.
- Hardware: 191048A2 axle stud & nut cross-fits Case skid steer axle studs.
- Brakes / control: Park brake components, control linkage, 48139268 control shock absorber for Case/NH skid steer control valves.
- Electrical: Starter, alternator, wiring harness, gauges, switches, 47405956 windshield wiper blade on cab-equipped XT units.
- Cab / operator station: Seat, cab glass, ROPS canopy, gauges, joystick controls.
Parts and cross-fit components for the Case 60XT
| Category | Common Parts | Browse |
|---|---|---|
| Engine | Cummins 4B pistons, rings, sleeves, bearings, gaskets | Browse Engine |
| Fuel System | Cummins injectors, lift pump, filters | Browse Fuel |
| Cooling | Radiator, water pump, charge-air cooler, hoses | Browse Cooling |
| Hydraulics | Lift/tilt cylinder seal kits, piston pump, valves | Browse Hydraulics |
| Drivetrain | Hydrostatic pumps/motors, drive chains, sprockets | Browse Drivetrain |
| Hardware | 191048A2 axle stud & nut (broad Case skid steer fit) | 191048A2 Stud & Nut |
| Brakes / Control | 48139268 control shock absorber | 48139268 Shock Absorber |
| Cab | 47405956 wiper blade, gauges, controls | 47405956 Wiper Blade |
| Electrical | Starter, alternator, wiring, switches | Browse Electrical |
| Operator Station | Seats, joysticks, ROPS | Browse Operator Station |
Need a part for your Case 60XT Skid Steer Loader?
Cummins 4B engine components, hydrostatic drive parts, and cylinder seal kits are the highest-volume items on a 60XT. Call our parts team with your serial number and we’ll match the right component to your machine.
Request a PartWhat to verify before ordering
- Serial number. Confirm the machine serial on the 60XT before ordering year-specific parts - the XT-series had running changes through production.
- Engine serial. Cummins 4B internal parts must match the engine serial number, and mechanical-injection vs. electronic variants take different fuel system components.
- Hydraulic cylinder bore. Lift and tilt cylinder seal kit fit depends on bore dimension - measure before ordering.
- Cab vs. ROPS canopy. Operator station equipment varied between cab and open-canopy configurations - affects glass, wipers, HVAC, and electrical.
- Hand vs. foot controls. XT-series machines shipped in different control configurations affecting joystick assemblies and linkages.
Why the 60XT still earns a paycheck
The Case 60XT is the XT-series Case skid steer that bridges the vintage 18-series simplicity and the alpha-series modern electronics. Cummins diesel reliability, hydrostatic dual-path service-friendliness, and modern-enough cab ergonomics keep it as a working machine on contractor yards and rental fleets. Parts coverage is strong because the 4B engine family is one of the most-supported industrial engines on the market, and the Case skid steer family shares major service components across the XT range.
Maintenance priorities on a 60XT: clean fuel and quality filtration on the Cummins, hydraulic oil kept clean and at temperature, drive-chain tension, cylinder seal replacement on schedule, and brake/control linkage service. Broken Tractor maintains parts coverage across the XT-series and the broader Case skid steer family.
