Case 410 Skid Steer Loader: 2005–2008 400-Series Tier 3 Skid Steer
The Case 410 is part of Case’s 400-series skid steer / compact track loader family - Tier 3 compact diesel, hydrostatic dual-path drive, and the operator interface that bridged the XT-series and the modern alpha (SR/SV/TR/TV) lineup.
Where the 410 fits in the Case skid steer / CTL line
The 410 sits in the Case 400-series skid steer / CTL range between the Case 95XT and the Case 420. Tier 3 compact diesel architecture, electronic engine controls, and the cab and instrumentation that defined Case’s mid-2000s skid steer / CTL line before the alpha rename.
Case 410 Skid Steer Loader - Quick Specs
- Class
- Skid Steer Loader
- Generation
- 400-Series
- Production
- 2005–2008
- Engine
- Tier 3 Compact Diesel
- Drivetrain
- Hydrostatic Dual-Path
- Predecessor
- Case 95XT
- Successor
- Case SR160 (Alpha)
- Serial Plate Location
- Kick plate behind operator’s right leg inside the cab
Engine, hydraulics, and drivetrain
The 410 runs a Tier 3 compact diesel through a hydrostatic dual-path drivetrain. Loader hydraulics use a piston pump with electrohydraulic control valves. A wet-disc park brake is integrated with the hydrostatic deceleration logic.
The drive system gives the operator independent left/right track or wheel control through dual joysticks (on ISO/H-pattern equipped machines) or the legacy hand-and-foot configuration on earlier orders. Loader-arm geometry is the radial-lift pattern Case carried throughout the 400-series.
Common service items on the 410
- Engine internals: Tier 3 compact diesel pistons, rings, sleeves, bearings, gaskets. Common-rail high-pressure injection.
- Fuel system: Common-rail injectors, lift pump, very tight water-separator filtration.
- Cooling system: Radiator, water pump, thermostat, fan, charge-air cooler, hoses, belts.
- Hydraulics: Loader lift and bucket tilt cylinder seal kits (86570919 / 86570931 / 86570922 cross-fit on NH/Case alpha-series), piston-pump rebuilds, electrohydraulic control valves.
- Drivetrain: Hydrostatic dual-path pumps and drive motors, charge pump, filters.
- Hardware: 191048A2 axle stud & nut cross-fits broadly across the Case skid steer line.
- Brakes / control: Park brake, control linkage, 48139268 control shock absorber on Case/NH alpha-series control valves.
- Electrical / ECU: Engine ECU, machine controller, instrument cluster, sensors, wiring harness, telematics module.
- Cab / operator station: Cab HVAC, seat, gauges, joystick controls, cab glass, 47405956 windshield wiper blade on cab-equipped units.
Parts we carry for the Case 410
| Category | Common Parts | Browse |
|---|---|---|
| Engine | Tier 3 compact diesel internals | Browse Engine |
| Fuel System | Common-rail injectors, lift pump, filters | Browse Fuel |
| Cooling | Radiator, water pump, charge-air cooler, hoses | Browse Cooling |
| Hydraulics | Lift/tilt cylinder seal kits, piston pump, valves | 86570919 Tilt Seal Kit |
| Drivetrain | Hydrostatic pumps and motors, charge pump | Browse Drivetrain |
| Brakes / Control | Park brake, control shock absorber | 48139268 Shock Absorber |
| Cab | Wiper blade, HVAC, controls, glass | 47405956 Wiper Blade |
| Electrical / ECU | ECU, harness, instrument cluster, sensors | Browse Electrical |
| Operator Station | Seats, joysticks, cab glass | Browse Operator Station |
| Hardware | Axle studs, nuts, fasteners | 191048A2 Stud & Nut |
Need a part for your Case 410 Skid Steer Loader?
Call our parts team with your serial number - we’ll match the right component to your machine.
Request a PartWhat to verify before ordering
- Serial number. Confirm the serial on the Case 410 before ordering year-specific parts.
- Engine serial. Internal engine parts must match the engine serial number.
- Aftertreatment generation. Tier 3 configuration varies by build year - confirm EGR/DPF layout before ordering.
- Hydraulic cylinder bore. Cylinder seal kit fit depends on bore dimension - measure before ordering.
- Cab vs. ROPS canopy. Operator station equipment varied between configurations.
- Control pattern. ISO/H-pattern vs. hand-and-foot - control valves and linkage differ.
Why the 410 still earns a paycheck
The Case 410 is the mid-2000s Case skid steer loader that bridged the XT-series and the current alpha lineup. Tier 3 emissions, modern electronics, and cab ergonomics that put the operator in a better seat than the XT predecessor.
Maintenance priorities on a 410: clean fuel and tight water separation for common-rail injection, EGR behavior on Tier 3 builds, hydrostatic charge pressure, and drive-chain tension. Broken Tractor maintains parts coverage across the 400-series and the broader Case skid steer / CTL family.
