King Kutter Cutter Parts
| Ref # | Image | Description | Fits Cutter Sizes | Part Number | Price | Add To Cart |
| 1 |
 |
Tail Wheel (with Hub) | 4', 5', 6' | 403001 | $60.00 | |
| 2 |
 |
Tail Wheel Fork | 4', 5', 6' | 403019 | $80.00 | |
 |
Tail Wheel Axle Bolt | 4', 5', 6' | 501280 | $15.00 | ||
| 3 |
 |
Tail Wheel Hub | 4', 5', 6' | 191100 | $20.00 | |
| 4 |
 |
Rear A-Frame Arm (4') | 4' | 401018 | $95.00 | |
| 4 |
|
Rear A-Frame Arm (5') | 5' | 401019 | $100.00 | |
| 4 |
|
Rear A-Frame Arm (6') | 6' | 401020 | $110.00 | |
| 5 |
 |
Height Adjuster | 4', 5', 6' | 310081 | $20.00 | |
| 6 |
 |
40-Hp Gearbox (4') | 4' | 184000 | $265.00 | |
| 6 |
|
40-Hp Gearbox (5' and 6') 12-Splines on bottom output shaft |
5' & 6' | 184005 | $265.00 | |
| 6 |
|
60-Hp Gearbox (6') 15-Splines on bottom output shaft |
6' | 184060 | $380.00 | |
| 7 |
 |
Front A-Frame Support Arm (4') | 4' | 310076 | $30.00 | |
| 7 |
|
Front A-Frame Support Arm (5') | 5' | 310074 | $35.00 | |
| 7 |
|
Front A-Frame Support Arm (6') | 6' | 310073 | $40.00 | |
| 8 |
 |
Drive Shaft (fits 4' wide cutter) |
4' | 147022 | $175.00 | |
| 8 |
|
Drive Shaft (fits 5' wide cutter) |
5' | 147029 | $185.00 | |
| 8 |
|
Drive Shaft (fits 6' wide cutter) |
6' | 147034 | $250.00 | |
| 9 |
|
A-Frame Arm | 4' & 5' | 310088 | $40.00 | |
| 9 |
|
A-Frame Arm | 6' | 310091 | $45.00 | |
| 10 |
 |
Lift Pin | 4', 5', 6' | 500001 | $10.00 | |
| 11 |
 |
Short Frame Support Bracket | 4', 5', 6' | 310071 | $25.00 | |
| 13 |
 |
Stump Jumper (12-spline) | 4', 5', & 6' with 40hp gearbox | 403031 | $125.00 | |
| 13 |
|
Stump Jumper (15-spline) | 6' with 60hp gearbox | 403032 | $135.00 | |
| 14 |
 |
Blade Bolt Set with Nuts and Washers | 4', 5', 6' | 501001 | $25.00 | |
| 15 |
 |
4' Blade Set | 4' | 501118 | $50.00 | |
| 15 |
|
5' Blade Set | 5' | 501124 | $55.00 | |
| 15 |
|
6' Blade Set | 6' | 501130 | $65.00 | |
| 16 |
 |
Swivel Kit | 4', 5', 6' | 501027 | $45.00 | |
| 17 |
 |
Wheel Washer Kit | 4', 5', 6' | 501013 | $5.00 | |
| 18 |
 |
Sheer Bolt Kit | 4', 5', 6' | 500101 | $10.00 | |
 |
Stump Jumper Castle Nut w/ Washer | 4', 5', 6' | 501110 | $15.00 | ||
| n/a | Drive Shaft Grease Fitting (5 per pack) | 4', 5', 6' | 132017 | $15.00 |
For orders, questions, or parts request e-mail:
parts@brokentractor.com
or Call:
Toll Free: (800) 909-7060
Local (225) 612-3966
Fax (225) 612-7562
